機房斷電后重啟pg數據庫，報如下錯誤：
< 2019-01-01 22:42:59.240 EST >LOG: database system was interrupted while in recovery at 2019-01-01 22:00:58 EST
< 2019-01-01 22:42:59.240 EST >HINT: This probably means that some data is corrupted and you will have to use the last backup for recovery.
< 2019-01-01 22:42:59.241 EST >LOG: database system was not properly shut down; automatic recovery in progress
< 2019-01-01 22:42:59.333 EST >PANIC: unexpected pageaddr 26EA/46000000 in log segment 00000001000026EA00000017, offset 0
< 2019-01-01 22:42:59.333 EST >LOG: startup process (PID 88586) was terminated by signal 6: Aborted
< 2019-01-01 22:42:59.333 EST >LOG: aborting startup due to startup process failure
修復方法：
切換到bin目錄下：
1cd /usr/pgsql-9.3/bin
使用pg_resetxlog命令修復日志：（/var/lib/pgsql/9.3/data為pg_data的目錄）
1pg_resetxlog -f /var/lib/pgsql/9.3/data
重啟數據庫：
1pg_ctl start
補充：PostgreSQL 數據庫服務無法啟動的解決方法
因為客戶那邊的磁盤一般是FAT32的文件系統，所以我們程序安裝時，采用手動安裝PostgreSQL的形式安裝數據庫，但初始化數據庫群成功并且成功注冊了系統服務后，
發現PostgreSQL的服務總是啟動不了，提示服務啟動又停止了，然后在系統時間查看器里發現報的錯誤是：Could not create inherited socket, 錯誤編碼為10022
解決方法：
運行 netsh winsock reset，重啟電腦，OK!
文章來源：腳本之家
來源地址：https://www.jb51.net/article/204287.htm
申請創業報道，分享創業好點子。點擊此處，共同探討創業新機遇！
